Change or rekey · Toronto
Smart Lock Installation
The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made.
In plain words
Our winters shape how a smart lock should be fitted. Cold drains batteries sooner, so the locksmith fits the maker's specified battery type, sets the low-battery alert to reach a checked phone, and shows how a fresh set goes in with gloves on. Meltwater that refreezes overnight can bind a bolt, so the strike is set to give the motor clearance. A storm door that traps summer heat, or a keypad facing driving snow, steers the choice of model and finish. Fitted this way, a smart lock is set up to perform through the cold months, even though batteries and materials still work harder in deep winter than in June.
How the visit goesHalf the evenings someone asks whether the back door got locked, and nobody is sure. A lock that relocks on its own, shows its state in an app and reports when it was last opened would settle the question.
Smart Lock Installation
How the visit goes
Signal strength at the door
If the lock is to be reached from a phone away from home, the network at the door matters as much as the lock. The locksmith checks how strong the Wi-Fi is on the door itself, not in the hallway, because a metal door, a brick wall or a router at the far end of the house can leave the entrance in a dead spot. Where it is weak, the options are a bridge plugged in near the door, a hub-based model that uses its own radio, or a Bluetooth lock that works locally and skips the network entirely. Finding this out before the box is opened avoids a lock that drops offline every evening.
Preparing the door before the lock
Good installations start with corrections, not with the new box. If the bolt was dragging, the locksmith tightens or replaces hinge screws with longer ones that reach the framing, shims a hinge to lift a dropped door, and dresses the strike pocket so the bolt has room to seat fully. Weatherstrip that pushes the door out of square is trimmed or repositioned. If the existing holes are undersized for the new lock, they are enlarged with a hole saw and a jig so they stay centred; if a mortise pocket from an old lock is in the way, it is filled and re-drilled. The door is then closed and the bolt tested by hand before any electronics are unpacked.
The override key has a home
With codes doing the daily work, the mechanical key is easy to forget, and forgetting where it lives is how a dead battery turns into a lockout. On a keyed model, the locksmith hands you the new keys for the rekeyed override cylinder before leaving, and talks through where they should stay: one on a keyring that leaves the house, one with a trusted neighbour or in a combination lockbox fixed somewhere discreet. Try that key in the lock every few months so the cylinder stays free and you know it still turns. If other doors were rekeyed to match, the same key now runs the whole house, and the previous keys can go in the recycling.
Smart Lock Installation
In the van
Hand screwdrivers, Phillips and Torx
Reinforced box strike with long screws
Adjustable-backset bolt and faceplate
Manufacturer-specified batteries
Mechanical override cylinder and repinning kit
Smart Lock Installation
What affects the quote
Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
Type of smart lock chosen
A keypad deadbolt, a Bluetooth model, a Wi-Fi model with a built-in radio or a lock that joins a home hub each sit at a different point on the hardware side of the quote, before any labour is counted.
Taking over an existing smart lock
Resetting, re-enrolling and cleaning the permissions on a lock that came with the property is a different job from fitting new hardware: less cutting, more account work, and it is quoted on its own footing.
What to have ready
- Should the door lock itself after it closes?
- Is there already a keypad or app lock on the door, and who set it up?
- Do you want codes only, phone control, alerts, or all three?
Smart Lock Installation: questions
QuestionsWhat information should I have ready when I call?
The door's material and rough thickness, what lock is on it now and whether it is a separate deadbolt above a knob or lever, and whether there is a storm door. Say what you want the lock to do: codes only, phone control, alerts, auto-lock. Mention how the Wi-Fi is at the front door if you know, whether you rent or own, and how many people need their own way in. A photo of the inside and outside of the existing lock is a real help.
How long does a smart lock installation take?
Plan on part of a morning or afternoon for one door. A straightforward swap onto a well-fitting door with the standard holes is the shorter end; a door that needs alignment work, holes enlarged or a mortise pocket filled takes longer, as does joining the lock to Wi-Fi and setting up several user codes. If other doors are being rekeyed to match the override key, add time for each cylinder.
How does a smart lock cope with our winters?
Well, with a little planning. Cold reduces battery capacity, so the locksmith fits fresh cells of the type the maker specifies and points you to the low-battery alert, and a new set before the first hard frost is a good habit. The bolt is aligned with clearance so a door that swells or shifts with freeze and thaw does not strain the motor. Keep ice off the keypad, and use lock de-icer only in the key cylinder, never on the touch surface.
Related services
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Lock Replacement & UpgradeThe century home's original mortise lock takes a key the size of a spoon, sticks in humid weather and has worn its strike to a groove.
- Vintage Mortise Lock ServiceThe interior bedroom doors on the second floor have the original mortise latches, and none of them close any more.